Welded & Perforated Type
Mesh & Sheet Workshop Fence is a practical industrial partition system with integrated mesh and sheet design, offering good isolation, dust prevention, noise reduction and safety protection. Made of quality low-carbon steel wire and color steel sheet with firm structure, it avoids workshop cross-interference.
It features galvanized, spray or PVC coated finishes for excellent corrosion and wear resistance, suitable for indoor industrial environments. Modular design enables fast assembly and flexible combination, saving labor and time.
Durable and cost-effective, it is widely used in workshop zoning, equipment protection, dust/noise isolation, warehouse partition and industrial safety applications.
Product Details– BDFENCE
What is a Welded & Perforated Type?
Mesh & Sheet Workshop Fence, also widely known as Combined Mesh-Sheet Workshop Fence or Integrated Partition Fence, is a high-practical industrial isolation system characterized by its integrated mesh and sheet combined design, offering an optimal blend of space division, safety protection, and easy installation for workshop use.
Welded & Perforated Type Specifications
Overall Size (H x W):0.6m-3.0m (any size).
Upper Mesh Section:
Height:1.2m, 1.5m / 1.0m-2.0m.
Wire Diameter (after coating):4.0mm/3.0mm-6.0mm.
Mesh Opening: 50x50mm/50x100mm, 60x60mm.
Frame Tube: 20x30mm square tube/20x20mm, 30x30mm.
Lower Perforated Panel:
Height:0.6m, 0.8m/0.5m-1.0m.
Material:Cold-rolled steel plate/Galvanized steel, stainless steel.
Thickness:1.0mm-1.2mm/0.8mm-2.0mm.
Hole Pattern: Round perforation (o5-o8mm)/Slotted, square, custom.
Special Accessories
- Welded & Perforated Type
Various structures available for Welded & Perforated Type
Introduction to Product Categories & Detailed Item Overview
Full-Service Industrial Chain
We provide a complete industrial chain covering production, coating, on-site installation and standardized warehousing services.
Applications of Welded & Perforated Type
Stable welded structure with strong load capacity.
Anti-corrosion, anti-rust, long service life.
Perforated design ensures air flow and clear sight.
Modular, simple to install and clean.
Production Process
30+ years metal fence design experience, 30+ technical team; modular & scene-specific customization
We select high-quality steel with strict testing, ensuring durability, corrosion resistance and stable performance for all fence products.
Standardized steel coils ensure uniform material composition, thickness and mechanical properties, guaranteeing stable quality across all fencing products.
Supports various hole patterns (round, square, slotted) for ventilation, visibility or decorative needs.
Flexible to form various frame and panel shapes, ideal for tailored fencing solutions.
Professional surface treatment ensures excellent corrosion resistance, weatherability and long-lasting finish for fences.
Strict quality inspection at each process ensures fence quality meets standards, with no defects and stable performance.
Standardized packaging protects products well; safe and efficient shipping ensures on-time delivery to global customers.
Related Product
Detailed Installation Process for Welded & Perforated Type
The installation of mesh & sheet workshop fence requires strict adherence to operational standards and detailed steps to ensure the overall stability, safety and practicality of the fence. Below is the expanded and detailed installation process, with in-depth explanations of each step, key points and precautions:
1. Site Preparation & Position Marking
Before starting the installation, thorough site preparation is the foundation to ensure smooth operations. First, clear the workshop/warehouse installation area, remove obstacles such as equipment, debris and cables, and clean the ground. Then, use a level to check ground flatness, leveling uneven areas with cement mortar if needed to ensure stable post fixing. Next, mark post positions and fence layout with measuring tools according to design drawings, ensuring alignment with workshop zoning, and mark alignment lines to guarantee straightness and verticality.
2. Fence Post Fixing & Installation
Fence post fixing is key to overall stability. First, check posts and accessories for damage, then fix posts firmly to the floor: use expansion bolts for concrete floors, or embed and backfill with compacted soil/concrete for soil ground. Erect posts vertically, adjust with a plumb line, tighten bolts to avoid shaking, and keep consistent post spacing (2-3 meters) to match mesh & sheet panel size. Check post height and alignment to prevent skewing.
3. Mesh & Sheet Panel Installation & Connection
After posts are fixed, install mesh & sheet panels. First, check panels for damage or coating loss, then lift panels between adjacent posts, align pre-drilled holes with post holes, and fix with bolts. Tighten fasteners evenly to ensure panels fit closely with posts. Connect adjacent panels with clips/bolts to form an integrated system, ensuring flat mesh/sheet surfaces and no distortion for effective isolation.
4. Accessory Installation & Reinforcement
Accessory installation enhances structural integrity. Install top/bottom rails (if equipped) and fix firmly with bolts to boost rigidity. Add anti-collision or warning accessories as needed. Re-tighten all loose fasteners, reinforce panel-post joints and corner positions with reinforcement plates, and double-check for missing/damaged parts to ensure long-term use.
5. Alignment & Stability Check
After installation, conduct a comprehensive check. Use a level and plumb line to verify post verticality (error ≤5mm/m) and panel flatness. Check overall straightness and stability by gently pushing panels, ensuring no shaking or loose connections. Adjust and reinforce any skewing, loose parts or deformed panels immediately to ensure safety and practicality.
6. Site Cleaning & Final Acceptance
Finally, clean the installation site, remove excess materials and tools, and wipe the fence surface to keep it neat. Conduct acceptance according to design drawings and workshop standards: check dimensions, connection firmness, surface quality and isolation effect. Rectify unqualified items immediately; the installation is completed once qualified.
Note
During installation, construction personnel should wear protective equipment. Avoid damaging the fence’s surface treatment (galvanizing, PVC coating) to ensure corrosion resistance. Prevent collision with workshop equipment and cables to avoid hazards.
Welded & Perforated Type by Hebei Bending Fence Technology
Hebei Bending Fence Technology Co., Ltd., located in Anping—the renowned “China Wire Mesh Hometown” of Hebei Province, is a professional manufacturer and exporter of high-quality metal fencing and mesh & sheet workshop fence solutions with over 30 years of industry expertise. Our Mesh & Sheet Workshop Fence is a flagship industrial isolation system, engineered with integrated mesh and sheet panels and sturdy steel posts for excellent stability, dust/noise reduction and isolation performance.
Crafted from premium low-carbon steel wire and color steel sheet via precision welding, it features a rigid structure and good durability. We offer galvanized, spray or PVC coated finishes for corrosion resistance, suitable for indoor industrial environments, with a service life of up to 20+ years.
Main Applications of Welded & Perforated Type
Its main applications cover industrial fields requiring space division, dust/noise control and safety protection.
In factories, it is widely used for workshop zoning, equipment protection, dust isolation and noise reduction.
In warehouses, it serves for goods classification, dangerous goods isolation and inventory management.
For processing centers, it is suitable for production line enclosure and cross-interference prevention.
In logistics centers, it is used for cargo sorting area division and equipment protection.
In workshops, it provides reliable isolation for different processing zones to ensure production safety.
Core Advantages
High Stability: Rigid integrated mesh & sheet design with sturdy posts, anti-deformation and long service life.
Superior Durability: Professional surface treatment, corrosion-resistant and wear-resistant for industrial environments.
Dust & Noise Reduction: Combined design effectively blocks dust, noise and sight, avoiding cross-interference.
Cost-Effective: Modular design for fast installation, easy disassembly and low maintenance.
Strong Flexibility: Customizable size and combination, adapting to various workshop zoning needs.